User guide / RacerRX

Setups and rounds

Run a race day from Baseline to Feature, rate every round, and find what you ran last time.

Setups and rounds

Every setup you have ever run lives here, star-rated and searchable. A race night is a set of stages, and each stage gets its own saved setup.

Setup list for Red Rocket, newest race first, each with a star rating, and Copper Ridge Fall Classic marked as a favorite

Baseline through Feature

Each race day starts with four sessions: Baseline, Round 1, Round 2 and Feature. You start from a baseline, log what you ran in each round, and finish with the Feature. When you're done, tap the checkered-flag button and "I'm done racing". Running more rounds than that? Open the 3-dot menu, pick Edit sessions, and turn on more sessions or tap one to rename it, up to 12 per sheet. Next time you are at that track you can see the whole day, not just where you ended up.

Session bar with Baseline, Round 1, Round 2 and Feature above a setup sheetSession picker reading Seeding Round, 3 of 6, once more sessions are switched onEdit sessions list with twelve slots, switches and the recorded value count for each

A race night, step by step

  1. Baseline. Open the car and start from your saved baseline. Log the track and the conditions before you roll out.
  2. Round 1. Save what you ran. Rate the run 1 to 5. Note the conditions for that round.
  3. Between rounds. Tap Ask AI Crew Chief, or Analyze this session on the Recap tab, and say how the car drove and what the track did. Try the change it suggests.
  4. Round 2. Log what you changed, rate it, log conditions again. Changed values are shaded, so you can see what moved.
  5. Feature. Rate it and write your race recap notes while they're fresh. Then tap "I'm done racing".

Do that every night and the next trip to the same track starts with a rated history instead of a memory.

Baseline Pre-Race Conditions: outdoor, dirt, medium flat oval, smooth and hard packedRound 1 Recap with start P4, finish P3, session time and a three star ratingFeature Notes with a comment being typed about starting on the 23 tooth pinion next time

Save and star-rate every run

Save the setup for every round. Then rate the run 1 to 5. Ratings are what make the history useful: the setups that worked rise to the top, and a lucky run stops looking like a good one. Rate changes too, so the combos that keep scoring well are easy to find.

Rate Round 2 Set Up at four stars, with Round 2 Race Conditions and Driver Feedback below it

Find any setup by track and car in seconds. Setups stay organized by track and by car, so the question "what did I run here last spring" has an answer instead of a guess.

Searching the setup list for Ironwood and finding Ironwood Fall SeriesApply Filters sheet with track, condition, car and tag chips

Full Setup Sheet

The Full Setup Sheet shows the complete setup on one screen, with your tags in the header. Open it with the expand icon at the top right of a setup. Share and Email sit under the setup details. Community setups you preview open here too, so you read someone else's baseline the same way you read your own.

Full Setup Sheet for the Feature with Heat win and Tacky tags in the header and Share and Email buttons under the setup details

Changed values stand out

Values you change in the current round are shaded one color, and values changed in an earlier round another, so you can see what moved without comparing two sheets by eye.

Shocks tab on Round 2 with Oil 25 wt outlined as a value changed this roundThe same shock field on the Feature, shaded lighter because the change came from an earlier roundFull Setup Sheet shocks grid with the two changed oil cells in orange

Customizable pick lists

Fields that take a value from a list, like shock oils or springs, use pick lists you can add to. Tap the field, then Add new. Values you added get an edit and a delete icon, and they show up on every setup.

Select Oil list with an edit and delete icon on every value and Add new at the bottomAdd to your list dialog with 35 wt typed inThe list again with 35 wt saved and selected

Photos and image upload

Upload images to any setup. Photos are tied to the setup they belong to, not lost in the camera roll, and each car keeps its own. Tap any inline photo to zoom in.

Chassis Photos strip under Chassis Notes with a photo of Red Rocket on the benchAdd Photo dialog offering Camera or GalleryA tire photo opened full screen and zoomed in

Race recap notes

Write a recap on every race night. What the track did, what the car did, what you would try next. Recap notes stay with the setup so the next visit starts with context.

Feature Notes with all three prompts answered: what changed, how the car handled, what to try next time

Baselines: save, rename and clone

A baseline is the setup you start a day from. Save one for each car with Save as baseline, then pick it under Select a starting baseline when you create a setup, and your known-good numbers are already filled in.

You can also edit and clone baselines: rename a baseline, or clone it into a new one and adjust from there. That is the quickest way to build a wet-track version of a dry-track baseline without retyping it.

Create New Baseline dialog naming it Copper Ridge dry from the Copper Ridge Points Race sheetBaseline menu with New Setup with this Baseline, Edit name and Clone baselineClone Baseline dialog naming the copy Red Clay Bend dry

Gear charts

The spur and pinion table is built into the Gears tab: tap Select, tap your combo and tap OK, and it saves to the setup. Some templates, like RC Traxxas MudBoss & Crate Late Model, add a View Gear Chart button with the maker's chart. More in Gears, chassis and calculators.

Pinion and Spur Table with 81 tooth spur and 23 tooth pinion selected for a 3.52 ratioGear Chart for the Mudboss template showing the maker's spur and pinion grid on Black Mamba's sheet

Pre-race conditions

Log the track and conditions every round, Baseline through Feature, so next time you know whether it was the car or the track.

Baseline Pre-Race Conditions with venue, surface type, track configuration and surface condition chipsRound 2 Recap with weather, surface condition and traction logged for that round

Conditions before every round

Before you roll out, log the surface type, track configuration and surface condition on the Baseline's Pre-Race Conditions tab. After each round, the Recap tab takes that round's weather, surface condition and traction, so a Round 2 change is read against the Round 2 track, not a guess about what the surface was doing.

Surface templates

The conditions you log follow your car's template: dirt oval or carpet oval. Start every day from the template built for your class and the right fields are already there.

One user guide for every RaceYear app. Switch apps in the sidebar.